NOJA Power Recloser1.15.0 - App Store
You'll be able to see results in few seconds.
Publisher Description
The NOJA Power Recloser App is designed to interface to NOJA Power RC10 Recloser control and communications cubicles via any TCPIP connection. When the USB - WiFi router accessory is fitted to enable WiFi capability the Recloser App will connect to the control to provide remote control and interrogation capability. This is a useful tool for Electricity Utility Linesman to control and interrogate their NOJA Power Switchgear products from the ground within the WiFi range of the device which is normally 50M.
The NOJA Power Recloser App provides remote connectivity to the NOJA Power RC10 Recloser control and communications cubicles when connected to accessories such as GPRS or WiMax.
The following functionality is supported when the control is in Local mode.
Controls:
√ Trip / close
√ Local / Remote
√ Active Protection Group
√ Protection On/Off
√ Auto Reclose On/Off
√ Live Line On/Off
√ Earth Fault On/Off
√ Sensitive Earth Fault On/Off
√ Under Voftage On/Off
√ Over Voftage On/Off
√ Automatic Backfeed Restoration On/Off
√ Cold Load Pickup On/Off
√ Hot Line Tag On/Off
Measurements:
√ 3 phase current
√ 3 phase voftage (all six bushings)
√ Frequency
√ Power
√ Power Factor
√ Power flow direction
√ Energy
Version History Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page 1.15.0 04/01/2022 Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11 1.14.2 08/09/2018 Fixed problem with connecting to OSM Test
Improved graphics for trip/close buttons
Increased visibility of connection error messages
Protection controls can be manipulated when there is a switch disconnect/failure/lockout, trip and close will be disabled if there is a failure/disconnect. App behaviour now mirrors CMS and panel behaviour
Fixed inconsistency with FQDNs
Improved connection stability 1.14.1 07/27/2016 Support for single triple.
Enhancements to user interface.
Communications connection performance improved
Time out or shutdown of the App will now immediately disconnect from the device
Important notes:
• Before updating from versions prior to v1.14.0 of the app, users should record the details of all currently registered devices since this update will remove all registered devices.
• All prior versions of this App, cannot open and close when connected to Relay version 1.14.0 and above. 1.14.0 05/04/2016 A test site is available, allowing tripping and closing with indication of voltages and currents.
The Fully Qualified DNS host name can now be entered in place of the IP address
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above 1.5 02/11/2014 The new version of the Recloser App supports remote control of multiple devices.
The IP address of all devices can be programmed into a Device List. The device you would like to connect to can be selected and controlled remotely from any location.
Universal app now supports the larger iPad layout with a custom interface to better take advantage of the available screen space.
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above. 1.4 08/29/2013 NOJA Power Recloser App V1.3 is required for connecting to RC10 Relay Versions 1.6.0 and above 1.3 06/21/2013 Language Support of Portuguese and Spanish 1.1 06/11/2012 1.0 05/11/2012
About NOJA Power Recloser
The company that develops NOJA Power Recloser is NOJA Power Switchgear Pty Ltd. The latest version released by its developer is 1.15.0.
To install NOJA Power Recloser on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the NOJA Power Recloser as malware if the download link is broken.
How to install NOJA Power Recloser on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the NOJA Power Recloser is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After NOJA Power Recloser is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.15.0
posted on 2026-10-14
Version History Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page 1.15.0 04/01/2022 Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11 1.14.2 08/09/2018 Fixed problem with connecting to OSM Test
Improved graphics for trip/close buttons
Increased visibility of connection error messages
Protection controls can be manipulated when there is a switch disconnect/failure/lockout, trip and close will be disabled if there is a failure/disconnect. App behaviour now mirrors CMS and panel behaviour
Fixed inconsistency with FQDNs
Improved connection stability 1.14.1 07/27/2016 Support for single triple.
Enhancements to user interface.
Communications connection performance improved
Time out or shutdown of the App will now immediately disconnect from the device
Important notes:
• Before updating from versions prior to v1.14.0 of the app, users should record the details of all currently registered devices since this update will remove all registered devices.
• All prior versions of this App, cannot open and close when connected to Relay version 1.14.0 and above. 1.14.0 05/04/2016 A test site is available, allowing tripping and closing with indication of voltages and currents.
The Fully Qualified DNS host name can now be entered in place of the IP address
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above 1.5 02/11/2014 The new version of the Recloser App supports remote control of multiple devices.
The IP address of all devices can be programmed into a Device List. The device you would like to connect to can be selected and controlled remotely from any location.
Universal app now supports the larger iPad layout with a custom interface to better take advantage of the available screen space.
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above. 1.4 08/29/2013 NOJA Power Recloser App V1.3 is required for connecting to RC10 Relay Versions 1.6.0 and above 1.3 06/21/2013 Language Support of Portuguese and Spanish 1.1 06/11/2012 1.0 05/11/2012
version 1.15.0
posted on 2026-09-07
Version History Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page 1.15.0 04/01/2022 This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11 1.14.2 08/09/2018 Fixed problem with connecting to OSM Test
Improved graphics for trip/close buttons
Increased visibility of connection error messages
Protection controls can be manipulated when there is a switch disconnect/failure/lockout, trip and close will be disabled if there is a failure/disconnect. App behaviour now mirrors CMS and panel behaviour
Fixed inconsistency with FQDNs
Improved connection stability 1.14.1 07/27/2016 Support for single triple.
Enhancements to user interface.
Communications connection performance improved
Time out or shutdown of the App will now immediately disconnect from the device
Important notes:
• Before updating from versions prior to v1.14.0 of the app, users should record the details of all currently registered devices since this update will remove all registered devices.
• All prior versions of this App, cannot open and close when connected to Relay version 1.14.0 and above. 1.14.0 05/04/2016 A test site is available, allowing tripping and closing with indication of voltages and currents.
The Fully Qualified DNS host name can now be entered in place of the IP address
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above 1.5 02/11/2014 The new version of the Recloser App supports remote control of multiple devices.
The IP address of all devices can be programmed into a Device List. The device you would like to connect to can be selected and controlled remotely from any location.
Universal app now supports the larger iPad layout with a custom interface to better take advantage of the available screen space.
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above. 1.4 08/29/2013 NOJA Power Recloser App V1.3 is required for connecting to RC10 Relay Versions 1.6.0 and above 1.3 06/21/2013 Language Support of Portuguese and Spanish 1.1 06/11/2012 1.0 05/11/2012
version 1.15.0
posted on 2026-08-12
Version History Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page 1.15.0 04/01/2022 This update from Apple will improve the functionality of this app. No new features are included.
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11 1.14.2 08/09/2018 Fixed problem with connecting to OSM Test
Improved graphics for trip/close buttons
Increased visibility of connection error messages
Protection controls can be manipulated when there is a switch disconnect/failure/lockout, trip and close will be disabled if there is a failure/disconnect. App behaviour now mirrors CMS and panel behaviour
Fixed inconsistency with FQDNs
Improved connection stability 1.14.1 07/27/2016 Support for single triple.
Enhancements to user interface.
Communications connection performance improved
Time out or shutdown of the App will now immediately disconnect from the device
Important notes:
• Before updating from versions prior to v1.14.0 of the app, users should record the details of all currently registered devices since this update will remove all registered devices.
• All prior versions of this App, cannot open and close when connected to Relay version 1.14.0 and above. 1.14.0 05/04/2016 A test site is available, allowing tripping and closing with indication of voltages and currents.
The Fully Qualified DNS host name can now be entered in place of the IP address
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above 1.5 02/11/2014 The new version of the Recloser App supports remote control of multiple devices.
The IP address of all devices can be programmed into a Device List. The device you would like to connect to can be selected and controlled remotely from any location.
Universal app now supports the larger iPad layout with a custom interface to better take advantage of the available screen space.
NOJA Power Recloser App V 1.3 and above are required for connecting to RC1O Relay Versions 1.6.0 and above. 1.4 08/29/2013 NOJA Power Recloser App V1.3 is required for connecting to RC10 Relay Versions 1.6.0 and above 1.3 06/21/2013 Language Support of Portuguese and Spanish 1.1 06/11/2012 1.0 05/11/2012
version 1.15.0
posted on 2022-04-01
Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page
version 1.15.0
posted on 2022-04-01
Apr 1, 2022 Version 1.15.0
Support for all latest RC devices and mobile platforms
Russian language support
Support for new protection settings and measurement parameters
Support for additional 4 groups for RC20 devices
Added link to a Privacy Policy web page
version 1.14.2
posted on 2018-08-09
Aug 9, 2018 Version 1.14.2
This app has been updated by Apple to display the Apple Watch app icon.
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11
version 1.14.2
posted on 2018-08-09
9 Aug 2018 Version 1.14.2
This app has been updated by Apple to use the latest Apple signing certificate.
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11
version 1.14.2
posted on 2018-08-09
Aug 9, 2018 Version 1.14.2
This app has been updated by Apple to use the latest Apple signing certificate.
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11
version 1.14.2
posted on 2018-08-09
Aug 9, 2018 Version 1.14.2
Improvements:
Added support of Russian translations
Added support of 3 phase SEF switchgear type
Added support of localization of control button titles
Added link for a Privacy Policy web page
Bug fixes:
Some of the enumeration strings replaced with numeric values
Localization doesn’t work on iOS 11
version 1.14.1
posted on 2012-05-11
Disclaimer
Official App Store Link
We do not host NOJA Power Recloser on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for NOJA Power Recloser is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
